F&P Rectangular Duct Lines (New) #3699

1500mm wide

Material thickness max. 1.5mm with R = 40kg/mm2

The lines come with two "main" parts, which are:

• a material straightener

• and a cutting-folding unit

and other modules that can be integrated with the two above:

• one or more payoff reel/s

• a multiple material feed-in unit

• a ribbing/corrugating unit

• 2 + 2 'U' & 'V' notchers

• a plasma cutter

• a transversal and a longitudinal flange and, resp. edge forming units

An industrial PC with Windows7 Embedded operating system is installed in the electric cabinet

The easy and intuitive program allows the operator both to use the machine and to introduce the data necessary for the production of the ducts

In addition, the data can be received via - network or USB pendrive, if the user has the "BRAVO" program

The possible Types of operations are:

- Type 0:

blanking

- Type 1:

making one-piece ducts

- Type 2:

making two-piece ducts, "L"-shaped

- Type 3:

making two-piece ducts, "U"-shaped + the lid

- Type 4:

making four-piece ducts

There are also 95 other types available, with shapes that can be created by the user

For each type of duct it is possible to enable or, respectively disable these operations:

- Folding

- "U" notching at the junction-points

- "V" notching at the bending-points

- Corrugating, even partial

- Cutting holes or any shapes that can be defined by the user, by the plasma generator

- Transversal marking

- Longitudinal marking

--Pittsburgh and/or Snap Lock forming

The line can be integrated with Pittsburgh and/or Snap-Lock Rollformer/s, with either automated in-line operation or alt. manually operated off-line / - the rollformer/s is/are quoted separately

• https://www.coilandstripequipment.com/listings/776098-new-f-p-pittsburgh-lock-formers-new-3704
• https://www.coilandstripequipment.com/listings/779129-new-f-p-f-p-snap-lock-formers-new-3705

In the two example line diagrams attached (at the bottom, under 'Documents'):

-1st diagram: multiple decoilers and material feed-in unit; straightener and ribbing machine; shear; roll former/s inserted transversely to the line, which automatically 'enter' to form the locks and then 'go back out'; folding machine; exit table

- 2nd diagram: decoilers and feed-in unit as above; straightener; ribbing machine; notching station; cut+fold unit

--

Technical characteristics of the different parts ^ of the line:

Straightener

with 2 rubber coated pinch rolls, dia.: 120mm + 5 chromium plated work rolls, dia.: 100mm

and:

-double chain transmission

-brushless motor* drive

(*by ABB or other primary Brand)

Hydraulic Cutting-Folding Station

Hydraulic Longitudinal-Ribbing/Corrugating Station

with dia. 120mm rolls

-for max. 6mm high ribs/corrugations, that can be adjusted in height and excluded as wanted

-step: 160mm

4- Coil Threading System with:

-adjustable guides for each coil, positionable on: 1250mm to 1500mm

-rubber coated pinch rolls and clamps for the coils not in use

Plasma Cutting Unit

with 60A plasma generator by CEBORA or other primary Brand

(an aspirator is required with 800m3/hour filter)

Transversal Snap Flange Forming Unit

Longitudinal 90° 'Male'-Edge Forming Unit with tooth for Snap Lock Closure

Stand Type Undriven Decoiler/s, in static execution or sliding on guides

with:

-5ton capacity

-manually operated mandrel drum expansion

-adjustable brake

• Option: Powered Decoiler/s

-