F&P 1550x4mm Slitting Line (New) #4356

NEW LINE

QUICK TOOL CHANGE TYPE

Direction: right to left

150m / minute 25ton Decoiler & Recoiler

Tensile strength : max N/mm2 700

Material thickness range : mm .5 ÷ 4.0

Coil width : mm 500 ÷ 1550 (acc. to coil outside diameter)

Max. coil weight at entry (decoiler) :

Tons 25

Max. coil weight at exit (recoiler) :

Tons 25

Min. outside diameter of coils : mm 800

Max. outside diameter of coils (decoiling) : mm 2000

Max. outside diameter of coils (recoiling) : mm 2000

Nominal inside diameter of coil (decoiling) for width over 900 mm : mm 508 – 915

Max inside diameter with width mm 500 : mm 690

Min OD with width mm 500 and ID 508 : mm 800

Min OD with width mm 500 and ID 690 : mm 1000

Max inside diameter with width mm 600 : mm 750

Max inside diameter with width mm 700 : mm 800

Max inside diameter with width mm 800 : mm 860

Max inside diameter with width mm 900 : mm 915

Nominal inside diameter of coils (recoiling) : mm 508

• Number of cuts with Rmax 700 n/mm2 :

at thickness .5 mm > 30

at thickness 1,0 mm > 20

at thickness 2,0 mm > 10

at thickness 3,0 mm > 8 :

at thickness 4,0 mm > 3

• ... with Rmax 510 n/mm2 :

at thickness .5 mm > 35

at thickness 1.0 mm > 25

at thickness 2.0 mm > 20

at thickness 3.0 mm > 10

at thickness 4.0 mm > 4

• Minimum slit coil width : mm 40

• Scrap width : min mm 5

Coil introduction speed : m/min’ 10

-