BREDA etc. Aluminium Profile Extrusion Lines with 1600ton and, resp. 1250ton Presses

ALUMINUM EXTRUSION LINE 1600 > SEE LISTING: #0592

&

ALUMINUM EXTRUSION LINE 1250

The used lines in question are being sold in "as is" condition, functioning.

They are currently installed and connected, were switched off at the end of October 2025.

Total installed power in both plants: 2000 KW.

Aluminum alloys workable: 6060-6063-6005

ALU EXTRUSION LINE - 1600

> SEE PHOTOS 1 & 2 > & SEE LISTING: #0592 ^

FEATURES: 1600 MT WITH 4 BREDA COLUMNS

YEAR OF MANUFACTURE: 1977

BILLET DIMENSIONS: Ø 7" X 780 mm

CONTAINER HEATING POWER: 40 KW

MAIN PUMPS: 3 BRUENINGHAUS 481 LT

CYCLE DEAD TIME: 14 SEC.

GE PLC CONTROL 

BILLET HEATING AND SHEARING LINE

A) BILLET HEATING FURNACE / FUEL: Ø 7" YEAR 1995 COMETAL - 4000 kg/h / METHANE

B) BILLET LOADING BUFFER: YEAR 1995 COMETAL

C) HOT BILLET SHEAR: Ø 7" YEAR 1995 COMETAL

EXTRUSION BENCH 

EXTRUSION BENCH: 500mm x 60,000mm

A) KEVLAR ROLLER CONVEYOR: YEAR 1996

B) MOBILE HOT SAW: BLADE Ø 550mm, YEAR 1996

 PULLER

DOUBLE HYDRAULIC PULLER: MOUTH 320mm x W 60mm / TIMING BELT DRIVE

 COOLING BENCH

SUPPORT: KEVLAR BELTS

WIDTH 5500 mm - LENGTH 47000 mm 

IRONING MACHINE

IRONING MACHINE: OMS 20 T. YEAR 1992

MOUTH: 330 mm x 50 mm

 PACK FORMATION

PACK: 800 mm

OMS YEAR 1996 

FINISHING SAW

CUTTING WIDTH 850mm x 250mm (height) OMS YEAR 1992

 CUTTING TABLE

800mm x 9000mm PEZZORGNA, YEAR 1992

 STACKER

800mm x 1500mm PEZZORGNA, YEAR 1992

 AGING OVEN - GAS

9 BASKETS - medium capacity 1000 kg each

T5/T6 Treatments

OMAV, YEAR 1977

Average production 1300 kg net per hour.

The line has 2460 hours

ALU EXTRUSION LINE - 1250

> SEE PHOTOS 3 & 4

FEATURES: 1250 MT WITH 3 TCS COLUMNS

YEAR OF MANUFACTURE: 1988

BILLET DIMENSIONS: Ø 6" X 750 mm

CONTAINER HEATING POWER: 25 KW

MAIN PUMPS: 2 BRUENINGHAUS 481 LT - KW500

CYCLE DEAD TIME: 15 SEC.

GE PLC CONTROL

CONTAINER DIAMETER 160: 20 KW

OIL QUANTITY: 4000 LITRES 

BILLET HEATING AND SHEARING LINE

A) BILLET HEATING FURNACE / FUEL: Ø 6" YEAR 1988 COMETAL - 2500 kg/h / METHANE

B) BILLET LOADING BUFFER: YEAR 1988 COMETAL

C) HOT BILLET SHEAR: Ø 6" YEAR 1988 COMETAL

CONSUMPTION: 25/30 cubic meters per ton

POWER: 60 kW 

EXTRUSION TABLE

EXTRUSION TABLE: 550 MM X 5600 MM

A) ROLLER CONVEYOR: YEAR 1988

B) MOBILE HOT SAW: BLADE DIAMETER 550 MM - YEAR 1988

POWER 10 KW 

PNEUMATIC PULLER

PNEUMATIC PULLER: 380 MM X 170 MM OPENING

DEAD TIME: 15 SECONDS

POWER: 50 KW

COOLING BENCH

SUPPORT: KEVLAR PELLEGRINO STEP

WIDTH: 4600 MM

LENGTH: 47000 MM

POWER: 20 KW

IRONING MACHINE

COMETAL 15-TON IRONING MACHINE, YEAR 1988

MOUTH 380 MM X 170 MM

POWER 30 KW 

800 mm COMETAL PACK FORMATION, year 1988

CUTTER ROLLERS: 900 mm by 600 mm - COMETAL / year 1988

COMETAL FINISHING SAW

850 mm cutting width x 250 mm height

8 kW power

 CUTTING TABLE 800 mm x 9000 mm / PEZZORGNA year 1992

STACKER 800 mm X 1500 mm PEZZORGNA year 1996

AGING OVEN with nine baskets – COMETAL, year 1988

automatic introduction, power 80 kW

ELECTRIC MATRIX OVEN

number two electric matrix ovens with well, for 6 matrices+6 matrices

power 50 kW

-