F&P "RAM" Electronic Straightener-Feeders #3572.1

STANDARD RANGE for materials up to 8mm thick ( Video [click] : > https://drive.google.com/file/d/1DUR-zisa9yB52EGTfXHyi4FBDlaEOfH8/view?usp=sharing ) Straighteners with two sets of feed rolls driven by a brushless servo system, closed loop type - The Models: 200mm to 1500mm wide with 5, 7 or 9 Work Rolls and with upper/lower Back-Ups on demand -- All rolls full-width, made from 17NiCrMo6-4 EN10084-2008, casehardened to 60-62 HRC, chromium plated and ground Air operated upper feed roll Air pressure filter, regulator, lubricator with gauge Gears: 17NiCrMo6-4 EN10084-2008 with hardened teeth to 60-62 HRC Entry material-centering rolls with mechanical indicator of position Emergency stop push button Inch or metric capability Control language available in English, Italian -- Fixed and, resp. openable* machine frame versions for all Models *up to 40 cycles/minute for pilot-centering; or higher frequencies on demand -- 25m / minute "standard" maximum speed, variable with inverter --- loop control by sensor on the floor or laser-cell, or ultrasonic - higher maximum speeds on demand -- Options: Powered depth adjustment on upper straightener-rolls Manual or auto. central lubrication Powered vertical adjustment on cabinet base Self centering guide rolls with single handwheel and built-in mechanical counter End of coil detection -- (please see details in the Attachs. at the bottom of the page) - The control panel is normally mounted on a machine frame side The machine height is adjustable (automatically as option) - Motors: by SIEMENS Reduction units: by TRAMEC Pneumatic cylinders: by SMC Bearings: by SKF Electrics: by LEGRAND, OMRON, SIEMENS, TELEMECANIQUE, WEBER -- our "std." paint colours: RAL 7035 light grey + RAL 1005 honey yellow (protection cases) + RAL 2030 (mobile parts) custom paint colours on demand with no extra charge